Jmac keymo12/7/2023 This is a licensed product through Dead Air Silencers. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product. KeyMo & KeyMicro Suppressor compatible 10mm Bore 2. In addition to the BDS-37, the DA428 is compatible with several many popular suppressors utilizing the 1.375x24 (Omega) thread pattern. Contact us if you have any questions or need a recommendation for professional installation. The DA428 KeyMo Adapter (Omega) from Dead Air Silencers will allow you to attach our BDS-37 Blast Diversion Shield or Extended Blast Shield to any of our KeyMicro muzzle devices. All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. We recommend this be professionally installed and checked to ensure alignment.*** ***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. your ongoing saga I would checkout using a JMac Customs KeyMo for your can. *When testing these devices, we found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels. 56 4150CMV nitrided barrel, pinned JMAC flash hider / Keymo silencer mount. *Not intended or recommend for barrels shorter than 10.5” (see below).*Can be permanently attached to a 14.5" barrel to achieve 16" OAL. The RRD-2C was created by removing the 2 smallest ports from the RRD-4C, creating a more compact package while still maintaining the ability to mitigate recoil. The RRD-2C is a shortened version of our popular RRD-4C muzzle brake. This is a licensed product through Dead Air Silencers.(R)ecoil (R)eduction (D)evice (2) ports (C)ompensator (28)1/2x28 (S)houlderMount (KM)KeyMount Get the best of both worlds JMac Customs extremelyeffective RRD4-4C muzzle brake comp with KEYMO suppressor mountThese are designed to install with. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product. Not intended or recommend for barrels shorter than 10.5 (see below) When testing these devices, we found that high rates of fire such as full auto or mag dumps could cause damage to the device due to the excess heat, pressure, and. Contact us if you have any questions or need a recommendation for professional installation. The use of additional, smaller ports, allows the gasses to disperse in a less concentrated pattern which reduces. This device vents gasses 360 degrees away from your muzzle requiring less effort from the shooter to manage recoil. ***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. 360 14-1LH Face KeyMount (KeyMicro) The RRD-360 Muzzle Device from JMAC Customs is unlike others on the market today. If you're not familiar with Facemount devices, click HERE to learn more! Designed specifically for our X-Series brake mount, this adapter allows you to install pretty much any Omega/Bravo adapter and muzzle devices including KeyMo, ASR, YHM, Plan B etc Wolverine Standard Length with 14mm adapter: 7.44 Wolverine with our adapter and 14mm X37 brake: 7.28 -17.4ph Stainless -Fits most Bravo/Omega 1.375-24 adapters. You must use our face shims (optional) or your barrel MUST be faced to properly time this muzzle device. This device is designed to be tightened against the face of the barrel. Barrel must extend at least 1.32” from the gas block. *This WILL NOT work on a standard AKM, pistol, or SBR. *When testing these devices, we found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels. ![]() ![]() ![]() This RRD-4C is designed to be permanently attached to a 14.5 inch barrel and allows you to attach KeyMount compatible devices and suppressors! We recommend this muzzle device be professionally installed on our 14.5" barrel by one of our Kalashnismiths to ensure alignment. ![]() The best of both worlds! Our super effective RRD-4C muzzle brake with KEYMO suppressor mount! The JMac Customs 2C H&K 15x1 Muzzle Brake with Keymount - KeyMo or KeyMokeyMicro is a tough muzzle device made by those who know that muzzle devices are the unsung heroes of increased accuracy and decreased recoil. (R)ecoil(R)eduction(D)evice(4) ports(C)ompensator(14)mmLH threads(F)ace(KM) KeyMount
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |